Transition-networks CBFTF10XX-15X Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Transition-networks CBFTF10XX-15X. Transition Networks CBFTF10XX-15X User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 7
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
* Typical maximum cable distance. (Actual distance is dependent upon the
physical characteristics of the network.) (TX) = transmit (RX) = receive
** SBFTF1029-
150 and SBFTF1029-151 are intended to be installed in the same
network where one is the local converter and the other is the remote
converter.
*** SBFTF1029-
152 and SBFTF1029-153
are intended to be installed in the same
network where one is the local
converter and the other is the remote
converter.
USER’S GUIDE
CBFTF10xx-15x
Slide-in-Module Media Converter
Copper to Fiber
10/100 Bridging (2-Port)
10Base-T/100Base-TX to 100Base-FX
The CBFTF10xx-15x 2-port Ethernet/Fast Ethernet
bridging Media Converter is designed to be
installed in a Transition Networks PointSystem™
chassis and connects 10Base-T Ethernet or
100Base-TX Fast Ethernet twisted-pair copper
network devices to network devices on a 100Base-
FX Fast Ethernet fiber network.
CBFTF1029-150** RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
singlemode, 20 km (12.4 miles)*
CBFTF1029-151** RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
singlemode, 20 km (12.4 miles)*
CBFTF1029-152*** RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
singlemode, 40 km (24.8 miles)*
CBFTF1029-153*** RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
singlemode, 40 km (24.8 miles)*
Part Number Port One - Copper
10Base-T/100Base-TX
Port Two - Duplex Fiber-Optic
100Base-FX
CBFTF1011-150 RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
CBFTF1013-150 RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
CBFTF1014-150 RJ-45
100 m (328 ft)*
SC, 1310 nm singlemode
20 km (12.4 miles)*
CBFTF1015-150 RJ-45
100 m (328 ft)*
SC, 1310 nm singlemode
40 km (24.8 miles)*
CBFTF1018-150 RJ-45
100 m (328 ft)*
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .8
Technical Specifications . . . . . . . .9
Fault Isolation and Correction . .10
Compliance Information . . . . . . .12
Zobrazit stránku 0
1 2 3 4 5 6 7

Shrnutí obsahu

Strany 1 - USER’S GUIDE

* Typical maximum cable distance. (Actual distance is dependent upon thephysical characteristics of the network.) (TX) = transmit (RX) = receive**

Strany 2 - INSTALLATION -- Continued

2CBFTF10xx-15xTech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)INSTALLATION CAUTION: Wear a grounding device and observe e

Strany 3 - OPERATION

4CBFTF10xx-15xTech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)INSTALLATION -- ContinuedInstall the Twisted-Pair Copper Ca

Strany 4 - OPERATION - Continued

6CBFTF10xx-15xTech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)OPERATION - ContinuedProduct FeaturesAuto-NegotiationThe Au

Strany 5 - TECHNICAL SPECIFICATIONS

8CBFTF10xx-15xTech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)CABLE SPECIFICATIONSThe physical characteristics must meet

Strany 6 - CONTACT US

10CBFTF10xx-15xTech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)FAULT ISOLATION AND RECOVERYIf the Media Converter fails,

Strany 7 - COMPLIANCE INFORMATION

Trademark NoticeAll trademarks and registered trademarks are the property of their respective owners.Copyright Restrictions© 2002-2003 Transition Netw

Komentáře k této Příručce

Žádné komentáře